Service Provided to M/V Windermere 2010

M/V windermere.

Main Engine – Type: Hitachi MAN 7L35MC Mk 6

"F.2.11 MAIN ENGINE CHARGE AIR COOLER:
Charge air cooler was removed from the engine and
chemically cleaned on both the air side and sea water side. On
completion of cleaning to the satisfaction of the Owner's Representative, the
coolers was pressure tested to 5 kg/cm2 with the Owner's
Representative in attendance.
The coolers was refitted to the engine room using gaskets supplied by InServ.
End covers were painted. Air cooler housing was cleaned and painted (adittional Work)."

F.2.12. Main Engine Turbocharger: Type: MHI MET 42SD: Main engine turbocharger was opened up and dismantled for Class survey. Rotor and compressor were removed and transported to turboshop, ( ash blasted and dynamically balanced were done by Seaboard) . Nozzle ring, labyrinth sealing and diffuser were removed, cleaned and checked. Filter and silencer were cleaned. Rotor was transported back to vessel and turbocharger was closed up in good order using Owner's supplied new seals, bearings and oil pumps.

F.2.10. Main Engine Governor: Make: Woodward Type: PG-A Governor to be removed to certified workshop for routine overhaul. Unit will be refitted, tested and adjusted to satisfaction of the attending Superintendent.
Governor was taken to certified workshop for routine overhaul (Done overhaul).
Supplied governor overhaul Kit.
Governor was removed, adusted and refitted back to engine after overhaul.
Governor transported to Governor shop and transported back to ship.

F.3.1. Auxy Engine Charge Air Coolers: Charge air coolers were removed and transported to InServ workshop for Chemical cleaning of sea water and air sides. Cooler to be pressure tested on completion of cleaning to Owner's representative satisfaction. Coolers were returned on board and refitted using InServ supply new gaskets. Sea water pressure 2.5 Kg/cm2. End covers were cleaned and painted with InServ supplied paint.

Mechanical Assistances for A.E. , M.E and Mechanical works, supplied four Technicians.
One (1) Service "A" Mechanic .
Three (3) Sevice "B" Mechanics.
Supplied 20 nuts and 20 washers for A.E.